SUNLU PLA+ PLA ABS PETG 3D Printer Filament 1KG/0.25KG 1.75mm Black No-Knot

Description

Product Description:
①【SUNLU 3D Filament】PLA PETG ABS PLA Plus 3D filament is the easiest, the most widely used filament, no clogging, no bubble. SUNLU filament has good layer adhesion and is easy to use.
②【1.75mm filament diameter】Dimensional accuracy +/- 0.02 mm. SUNLU filament has a wide compatibility due to the small diameter error and is suitable for almost all 1.75mm FDM 3D printers.
③【SUNLU Spool Diameter】Spool diameter: 8.00", spool width: 2.50", spool hub hole diameter: 2.20". The size of SUNLU filament spool is suitable for hanging on many FDM 3D printers.
④ 【Professional Team】SUNLU is a high-tech company specialized in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
Low shrinkage rate
Excellent impact resistance and strength
Environmental protection
Attention Please:You May Recevie 0.25KG/ 0.5KG/1KG Filament, It Depends on What You Choose.
Parameters for different types of consumables：
Type:PLA
Recommended Extrusion/Nozzle Temp: 200°C - 230°C (392°F - 446°F)
Heated Bed Temp: 50°C - 60°C(122°F - 140°F)
Filaments Diameter and Accuracy: 1.75 mm +/ 0.02 mm
Cooling Fan: Turned OFF or 50%
Printing Speed: 40~50(mm/s)
Raft Separation Distance: 0.14(mm)
Retraction Distance: 1~3 mm
(Note：Based on 0.4 mm nozzle and simplify 3D V 4.0.; Printing conditions may vary with different nozzle diameters.)
Type:PLA Meta
Recommended Extrusion/Nozzle Temp:180°C - 200°C
Heated Bed Temp: 50°C - 60°C(122°F - 140°F)
Filaments Diameter and Accuracy: 1.75 mm +/ 0.02 mm
Flowability
For Fast Printing
Type: PLA+ (PLA plus)
Nozzle 210°C - 235°C (410°F - 455°F)
Bed 70°C - 80°C (158°F - 176°F)
Printing Speed: 40-80(mm/s)
These settings are for 0.4mm nozzle, it may be different with different diameters nozzle
Type: PETG
Weight: 1 kg
Recommended Extrusion/Nozzle Temp: 235°C - 245°C (455°F - 473°F)
Heated Bed Temp: 65°C - 80°C(149°F - 176°F)
Filaments Diameter and Accuracy: 1.75 mm +/ 0.02 mm
Printing Speed: 40~50(mm/s)
Raft Separation Distance: 0.14(mm)
Retraction Distance: 1~3 mm
Type:TPU
Weight: 1 kg
Nozzle temperature of 205°C - 230°C (401°F - 446°F)
Bed temperature of 0°C - 60°C (0°F - 140°F)
Printing speed is 0 - 40mm/s.
Dimensional Accuracy: +/- 0.03mm
High accuracy
Originality Craft
Wide range of applications
FAQ
Why can't the filaments just stick to the hatchery?
1). Check the temperature setting before printing, PLA filament temperature about 190-220 ℃;
2). Check if the plate surface has been used for a long time. It is recommended to apply PVA glue.
3). If the first layer has poor adhesion, it is recommended to realign the print substrate to reduce the distance between the nozzle and the surface plate
On Dec 18, 2022 at 19:33:29 PST, seller added the following information: