SUNLU PLA PLA+ PETG SILK ABS TPU 3D Printer Filament 1.75mm 1KG/0.25KG Non-toxic

Description

About this item
➽【Toughness plus = SUNLU , Say No to Brittle 】SUNLU no as brittle as normal PLA. Better toughness, brighter color, higher strength；lower shrinkage, lower warping; SUNLU filament more easier to print, and odorless, making good print results.
➽【1.75mm 1KG Pack Vacuum Pack  Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
➽【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
➽【High Precision +/- 0.02mm Tolerance】: 1.75mm 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
➽【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Filament Type
PLA
PLA+ SILK
ABS
PETG
PLA+
PLA Meta
TPU
Nozzle Temp.
205-230℃
230-270℃
220-250℃
210-235℃
180-200℃
205-230℃
Print Speed
50-100mm/s
50-100mm/s
50-100mm/s
50-100mm/s
50-100mm/s
50-100mm/s
20-40mm/s
Platform Temp
60-80℃
80-120℃
70-80℃
50-65
℃
No heating required
Tolerance
1.75mm+/-0.02mm
Net Weight
1KG/ 0.25KG
1KG/ 0.25KG
1KG
1KG
1KG
1KG/ 0.25KG
0.5KG
SUNLU PLA 3D Printer Filament
SUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.
It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.
FDM 3D Printer Material
SUNLU  filament is easier to print and it's odorless, which gives you good printing results. And all our 3D printer filaments are vacuumed sealed along with a desiccant pack.
Starch Raw Materials
SUNLU 1.75 mm 3D filament is made of starch raw materials obtained from renewable plant resources such as corn.
Good Versatility
SUNLU 1.75 mm  filament is compatible with popular 1.75mm FDM 3D printers,which help you DIY your imagination.
On Dec 25, 2022 at 18:12:05 PST, seller added the following information: